YR series high voltage wound rotor three-phase asynchronous motor brief introduction
Rated voltage:6kV,10kV
Rated power:185kW~5,600kW
1． General
YR series high voltage wound rotor three-phase asynchronous motors (Frame sizes 355-1000), are our new generation products designed and manufactured by the technical personnel of our company who summarized more than ten years trial manufacture experiences for medium-scale YR series three-phase asynchronous motors and absorbed the advanced technique abroad. The mounting dimensions, power grades, electrical performance of these motors all comply with the national standard GB755-2000 Rotating electrical machines--Rating and performance, machine industry standard JB/T7594-94 YR series high voltage wound rotor three-phase asynchronous motor technique condition (Frame sizes 355-1000) and relevant IEC international standard. Compare with the national design project previous, these motors adopted advanced technical result of the motor industry in recent years more, therefore the configuration is more reasonable, and the craft is more advanced, the motors are with features of high efficiency and power factor, low noise and vibration, reliable performance and convenience for mounting and maintaining.
The rated frequency of the motor is 50 Hz, and we can also provide 60 Hz or special frequency motor under the request of the order.
The configuration and mounting type of the motor is IMB3 and the cooling method is IC01.
2． Configuration
The motor has a box structure and the base is welded by steel plate. Its configuration is compact and comfortable, thus the rigidity and stability is good; The slip ring is located at the unloaded side out of the base, it have inspection windows on two side, it is convenient for the maintenance and repairing of the motor.
The stators of our motors are mounted by outside press method to parallel work and shorten the production period; The windings are made of class F insulation materials, temperature rise will be considered on class B to extension the life; At each end there are reliable fastness and colligation. During processing, they are suffered many times of pulse voltage tests on windings interlayer and voltage endurance test to ground, and the motor has excellent insulation, strong mechanical and fine moisture protection. The wound rotor is the copper bars configuration, the windings are made of class F insulation materials, and the reliable fastness and colligation are adopted for end parts of the windings to ensure the reliability of the motor operation.
YR series motor is a basic series and its protection class is IP23. We can also manufacture derived series motor under the order request such as YRKS, YRKS- W(IP44 or IP54), YRQF( IP24) etc.
The junction box of the stator is located at the right side of the motor generally (viewed from the end of shaft extension), it can be also located at the left side of the motor under the order request, one ground terminal has been set in it.
3． Application
These motors can be used to drive different general machines such as compressor, water pump, crusher, cutting machine, transportation equipment and other facilities, it is widely used in the power plant, mine, machine industry, building material industry, petroleum and chemical industry, etc. If your ordered motors are used to drive blower, coal-grinder, rolling mill, windlass, please clarify the application and technique requests at the time of placing your order so that we can use special design to ensure the reliable operation of the motor.
|
|
|
| [ Contact Info ] |
| Company |
Shenyang Brilliant Motor Co.,Ltd |
| Address |
No.30-2,Dongling Road,Dongling district Shenyang Liaoning 110161 China |
| Phone |
86 - 024 - 88456521 |
| Fax |
86 - 024 - 88456608 |
| Homepage |
www.bltmotor.com
|
| Contact |
Byron Lun |
|
|
|
|
|
|
|
